|
Netoptics provides traffic visibility for passive monitoring of 10/100/1000 links at 10, 100, or 1000 Mbps. Total traffic visibility for monitoring and security devices is critical to safeguarding networks and ensuring business continuity. You need a way to monitor the data flowing across your networks and to be able to react fast when problems arise. However, a tap used with monitoring devices can introduce dangerous points of failure and compromise other network connections. You need a solution that can provide fail-safe access for network monitoring without negatively impacting network performance.
Solution: Tapping into total traffic visibility
Full-duplex monitoring, 100% visibility, easy deployment—these are the key capabilities you need to support passive monitoring of 10/100/1000 links at 10, 100, or 1000 Mbps. Netoptics' 10/100/1Gb Copper Taps fit the bill by providing passive access on critical network links without generating data-stream interference or introducing a point of failure.
Featuring link fault–detect (LFD) technology, Netoptics Copper Taps provide the devices connected to each tap with critical information about link status. If either side of a bi-directional link fail, the tap immediately communicates the fault to devices on both links, reducing time required to activate a redundant path.
Taps also include all network and monitoring cables needed for plug-and-play deployment. And because you can never be too careful, the 10/100/1Gb Copper Taps deliver redundant power connections for additional uptime protection.
|
